Installation For Windows 2000 - Kyocera iBurst UTC User Manual

Installation for Windows 2000

Installation for Windows 2000
Installation for Windows 2000 Installation for Windows 2000
ATTENTION: Don't choose "PCIC Compatible" mode of PC card controller in BIOS menu if
your PC has such menu. Please choose "Auto-Selected" or "CardBus/16bit" if
BIOS has it. There is a case that some models of PCs cannot drive iBurst
Modem due to BIOS or PC card driver problem.
1. Make sure to remove the iBurst Modem from your PC.
ATTENTION:
Don Don' ' ' ' t t t t plug Don Don plug the plug plug the iBurst Modem the the iBurst Modem into iBurst Modem iBurst Modem
2. Turn your PC on.
3. Insert the Software Utility CD provided by the network operator into your CD-ROM drive; or
execute the appropriate installation software.
4. iBurst Setup starts. Click the [Next >] button.
5. Select [I accept the terms the license agreement], click the [Next >] button.
Kyocera Corporation
iBurst Modem Card Model (UTC) Manual iBurst Modem Card Model (UTC) Manual
iBurst Modem Card Model (UTC) Manual iBurst Modem Card Model (UTC) Manual
into your PC until completion of installation. into into your PC until completion of installation. your PC until completion of installation. your PC until completion of installation.
- 15 -
Revision 1.01 --- June.08.2006