43. Click the [Add...] button on [Configuration] tab.
The name of a network adaptor shall be;
"iBurst Modem" or
"iBurst Modem Type 02-01".
44. Select [Protocol] and click the [Add...] button.
45. Click the [Have Disk...] button.
Kyocera Corporation
iBurst Modem Card Model (UTC) Manual
iBurst Modem Card Model (UTC) Manual
iBurst Modem Card Model (UTC) Manual
iBurst Modem Card Model (UTC) Manual
- 33 -
Revision 1.01 --- June.08.2006