Using Beat Loops - PIONEER DJ DDJ-800 Operating Instructions Manual

Using beat loops

When a performance pad is pressed, a loop with the number of beats
assigned to the pad is set, and loop playback continues even when
you release your finger from the pad.
1 Press the [BEAT JUMP] mode button while pressing the
[SHIFT] button.
This unit enters beat loop mode.
The number of beats for beat loop mode is assigned to the respective
performance pads as shown below.
! When you press the [PAGE c ] button or [PAGE d ] button, the number of
beats assigned to the performance pad changes.
2 Press a performance pad.
A loop with the number of beats assigned to the pad that was pressed is
played.
3 Press the same performance pad again.
Loop playback is canceled.
Beat Loop Beat Loop Beat Loop
1/64 beat 1/32 beat 1/16 beat
Beat Loop Beat Loop Beat Loop
1/4 beat 1/2 beat
54 54
Advanced operation
Beat Loop
1/8 beat
Beat Loop
1 beat 2 beats