Using The Beat Fx Function - PIONEER DJ DDJ-800 Operating Instructions Manual

Using the BEAT FX function

You can set various effects according to the tempo (BPM = Beats Per
Minute) of the track currently playing using the BEAT FX function.
Main display
1
Effect name
AUTO
2
(TAP)
BPM value
3
display
(3 digits)
Beat/
parameter
4
display
section
Selected
channel
5
display
section
1 Press the [BEAT c] or [BEAT d] button while pressing the
[SHIFT] button.
Select the BPM measurement mode.
— [AUTO]: Press the [BEAT c ] button while pressing the [SHIFT] button.
The BPM is automatically measured from the input audio signal.
2
3
4
Displays the name of the selected effect.
When the BPM measurement mode is auto mode,
[AUTO] is displayed. When it is manual input
mode, [TAP] is displayed.
Displays the automatically detected BPM in auto
mode.
If the BPM cannot be detected, the previously
detected BPM value flashes.
Displays the manually input BPM value in manual
input mode.
Displays the selected number of beats.
Displays parameters when the [BEAT c, d]
buttons are pressed for some effects. Blinks when
outside the parameter limits.
Displays the channel to which the effect is to be
applied. SAMPLER, CH 1, CH 2, CH 3, CH 4,
or MASTER is displayed depending on what is
selected.
64 64
Advanced operation
1
5