Mixing The Sound Of A Dj Player, Etc.; Mixing The Sound Of An Analog Turntable, Etc. - PIONEER DJ DDJ-800 Operating Instructions Manual

Mixing the sound of a DJ player, etc.

1 Connect your PC/Mac and the unit with a USB cable.
2 Launch rekordbox.
3 Connect a DJ player or other line level output device to the
[LINE/PHONO] input terminals.
4 Set the [LINE/PHONO] switch on the rear panel of this unit to
[LINE].
! Be sure to change the setting of the [LINE/PHONO] switch when the
power of the unit is off.
5 Turn on this unit's power.
6 Set the [PHONO/LINE, DECK3, DECK1] selector switch or
[DECK2, DECK4, PHONO/LINE] selector switch on top of the
unit to [PHONO/LINE].
7 Operate the [TRIM] control and channel fader to adjust the level
of sound output from each channel.

Mixing the sound of an analog turntable, etc.

1 Connect your PC/Mac and the unit with a USB cable.
2 Launch rekordbox.
3 Connect the analog player or other phono level (for MM
cartridges) output device to the [LINE/PHONO] input terminals.
! Connect the ground wire of an analog player to the [SIGNAL GND]
terminal of this unit.
4 Set the [LINE/PHONO] switch on the rear panel of this unit to
[PHONO].
! Be sure to change the setting of the [LINE/PHONO] switch when the
power of the unit is off.
5 Turn on this unit's power.
Advanced operation
81 81