Using The Fader Start Function; Using The Channel Fader Start Function - PIONEER DJ DDJ-800 Operating Instructions Manual

Using the fader start function

Using the channel fader start function

1 Set a cue point.
Pause playback at the position where you want to set a cue point (playback
start point), and press the [CUE] button for the corresponding deck.
! Cue points can also be set by moving the channel fader from the back to
the position nearest you while pressing the [SHIFT] button in the pause
mode.
2 Move the channel fader from the position nearest you towards
the back while pressing the [SHIFT] button.
Playback of the track starts from the set cue point.
! When the channel fader is moved back to the position nearest you while
pressing the [SHIFT] button during playback, the track moves back to the
set cue point and playback is paused (back cue).
If a cue point is not set, playback starts from the beginning of the track.
When the channel fader is moved from the back to the position nearest you
while pressing the [SHIFT] buttonwhen a cue is in standby, playback starts
from the set cue point.
Advanced operation
62 62