Vacon NXI FI9 series User Manual page 95

control keypad
Default page in the operating menu (P6.6.2)
Here you can set the location (page) in the
the display automatically moves to when the set
is switched on to the keypad.
See how to set the Default page in the above figure.
Timeout time (P6.6.3)
The Timeout time setting defines the time after which the keypad display returns to the Default page
(P6.6.1). (See previous page.)
Enter the edit mode by pressing
enter
the button. You can return to the previous menu at any time by pressing
READY
Timeout time
90 s
Figure 7-20. Timeout time setting
Default page
Note: If the
Contrast adjustment (P6.6.4)
In case the display is unclear, you can adjust its contrast through the same procedure as for the
timeout time setting (see above).
Backlight time (P6.6.5)
By giving a value for the
going out. You can select any time between 1 and 65535 minutes or 'Forever'. For the value setting
procedure, see Timeout time (P6.6.3).
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Operating menu
Menu button right
READY
Timeout time
90 s.
Timeout time
value is 0 the
Backlight time , you can determine how long the backlight stays on before
(in special applications only) to which
Timeout time
(see below) has expired or the power
. Set the desired timeout time and confirm it with
Timeout time
60 s.
setting has no effect.
vacon
Menu button left
.
READY
CONFIRM CHANGE
enter
CANCEL
95
7