Copy Parameters - Vacon NXI FI9 series User Manual

control keypad
STOP
I/Oterm
System Menu
è
S1
STOP
I/Oterm
Application
Standard
Figure 7-10. Change of application
7.3.6.3

Copy parameters

The parameter copy function is used when the operator wants to copy one or all parameter groups
from one drive to another. All the parameter groups are first
keypad is connected to another drive and then the parameter groups are
possibly back to the same drive). For more information, see page 90.
Before any parameters can be successfully copied from one drive to another, the drive has to be
stopped when the parameters are downloaded to it:
The parameter copy menu (S6.3) contains four functions:
Parameter sets (S6.3.1)
The user can reload the factory default parameter values and store and load two customised
parameter sets (all parameters included in the application).
On the Parameter sets
LoadFactDef
begins to blink and you can confirm the loading of factory defaults by pressing the
enter .
button The drive resets automatically.
Alternatively, you can choose any other storing or loading functions with the
enter
Confirm with the
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
READY
S11
READY
enter
page (S6.3.1), press Menu button right
button. Wait until 'OK' appears on the display.
STOP READY
I/Oterm
Application
Standard
STOP READY
I/Oterm
Application
Multi-step
uploaded
to the keypad, then the
downloaded
to enter the
vacon 89
to it (or
edit mode . The text
Browser buttons
.
7