Vacon NXI FI9 series User Manual page 93

control keypad
This function allows the user to prohibit changes to the parameters.
If the parameter lock is activated, the text
parameter value.
NOTE: This function does not prevent unauthorised editing of parameter values.
Enter the edit mode by pressing
parameter lock status. Confirm the change with the
pressing Menu button left.
READY
I/Oterm
System Menu
S1 è S9
READY
I/Oterm
Parameter Lock
ChangeEnable
Figure 7-15. Parameter locking
Start-up wizard (P6.5.3)
The Start-up wizard facilitates the commissioning of the inverter. If active, the Start-up wizard
prompts the operator for the language and application of his/her choice and then displays the first
menu or page.
Activating the Start-up wizard: In the System Menu, find page P6.5.3. Press
to enter the edit mode. Use the
enter
button. If you want to deactivate the function, follow the same procedure and give the
No
parameter value .
READY
I/Oterm
Startup wizard
No
Figure 7-16. Activation of Start-up wizard
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
*locked* will appear on the display if you try to edit a
Menu button right.
Use the
enter
READY
I/Oterm
Security
è
P1 P4
READY
I/Oterm
Parameter Lock
enter
ChangeDisabl
Browser buttons to select
READY
I/Oterm
Startup wizard
No
Browser buttons
to change the
button or go back to the previous level by
I/Oterm
Parameter Lock
ChangeEnable
Menu button right
Yes and confirm the selection with the
READY
I/Oterm
Startup wizard
Yes
vacon 93
READY
once
enter
CONFIRM
CANCEL
7