Advertisement
Installation Instructions
D
A
Figure 3. Install Front Weight Carrier Bracket
A. Capscrews, 7/16-14 x 2 (Existing)
B. Locknut, Flange, 7/16-14 (Existing)
C. Bracket, Front Weight Carrier (New)
D. Front Axle (Existing)
BRACKET INSTALLATION
1. Install the new bracket (C, Figure 3) to front axle (D)
securing with existing 7/16-14 capscrews (A) and
existing 7/16-14 locknuts (B).
WEIGHT AND DECK INSTALLATION
1. Use one of the rods (A, Figure 5) in the lower hole of
bracket (D) to Install Mower Deck. See Operator's
Manual MOWER DECK REMOVAL &
INSTALLATION. Secure rod (A) with clip (B).
2. Insert one of the rods (A) through the hitch (D) and
weight (C). Secure rod (A) with clip (B).
S n a p p e r , I N C .
535 Macon Street
McDonough, GA 30253 USA
B
C
2
Rear Weight Carrier Kit
A
C
Figure 4. Remove and Discard Rod & Clip
A. Clip, Safety Pin
B. Rod
C. Hitch, Deck
D
C
Figure 5. Rods and Weight
A. Rods
B. Clip, Hair Pin
C. Weight
D. Bracket
© 2006 Simplicity Manufacturing, Inc. All Rights Reserved
B
A
B
A
Form No. 1733188-00
Rev. 06/2005
TP 200-4306-00-AT-N
Advertisement
