Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SystemAir VTK Airvent
Summary of Contents for SystemAir VTK Airvent
- Page 1 VTK Airvent Installation instructions Document in original language | · A001...
- Page 2 © Copyright Systemair AB All rights reserved E&OE Systemair AB reserves the rights to alter their products without notice. This also applies to products already ordered, as long as it does not affect the previously agreed specifications. | A001...
- Page 3 Contents Making holes for the duct........1 Mounting ............1 Function ............1 Accessories............2 Mounting washers........2 Filter change .........2 | A001...
- Page 5 Making holes for the duct | Making holes for the duct Drill holes through the inner wall, dimensions according to the table. See image for suitable location. ø (mm) Mounting 1. Cut the duct to adjust to the thickness of the wall 2.
-
Page 6: Filter Change
| Accessories Accessories Filter and accessories are available at www.systemair.com. Mounting washers 1. Turn the airvent’s plate counter clockwise from auto mode and detach. 2. Mount the washers to desired gap opening on the guide, add 2 mm (the stud on the washer shall run in the track of the guide). - Page 7 | A001...
- Page 8 Systemair Sverige AB Industrivägen 3 SE-739 30 Skinnskatteberg, Sweden Phone +46 222 440 00 Fax +46 222 440 99 www.systemair.com...
Need help?
Do you have a question about the VTK Airvent and is the answer not in the manual?
Questions and answers