Table of Contents
Advertisement
IPC / EX5 HD Camera Setup
IPC / HD Camera Setup EX5-HD1 / HD2
NOTE:
1.
This section is solely for the configuration, enabling and setting for the EX5-HD series
cameras which is a 720P HD resolution IP camera. Each camera has its own internal IP
address within the XDR
2.
Default IP address for the HD camera = 10.100.100.1
3.
Any IP cameras can start from IP address
4.
Recommend setting the EX5-HD camera on CH 5 (by scrolling down the screen), as CH 1 –
4 are utilized for Analog Cameras
Setup:
1.
Connect the EX5-HD series IP camera to the IPC slot on the XDR prior to setup
2.
To enable the HD camera in CH 5, scroll down to CH 5 and select Enable
3.
Click on Magnifying glass on the selected CH
address once camera is connected.
4.
To view, change or manually enter IP address of each camera, user can also select the
menu option
5.
Outside: This setting optimizes the EX5-HD camera when installed in outdoor
environment
If system does not detect IP address of EX5-HD camera when entered or having technical difficulty
configuring the camera, select Default
The system will automatically detect an connected EX5-HD cameras. Select the box and enable
the camera.
Reminder:
Click SAVE when done to store all settings
10.100.100.1 - 32
for XDR to scan and auto detect IP
24
Advertisement
Table of Contents
