System Assembly - WORKSWELL WIRIS PRO Quick Start Manual

Product Ar cle
The WIRIS Pro device will have an assigned ar cle number depending on the configura on delivered.
Ar cle Number is typically structured like this
EXPORT STATEMENT:
These commodi es are for commercial end use only. They may not be used in the design, development, pro-
duc on, or use of nuclear, chemical or biological weapons or missiles and not be sold transferred or exported
to Belarus, Burma (Myanmar), Ivory Coast (Côte d'Ivoire), Libya, Zimbabwe, Cuba, Iran, North Korea, Sudan,
Russia and Syria.

System Assembly

To prepare the system please follow these steps:
1. Connect the system to a display or to a wireless video link using HDMI micro cable (included).
2. Connect the system to a RC receiver using S.BUS or connect it to a generic USB keyboard via the rear USB
port.
3. Connect the power supply to the system using power supply cable (included). Powered wire is +9 to +36
VDC, ground wire is GND.
E-mail and Web Mobile:
support@workswell.eu +420 725 877 063
www.workswell.eu
thermal
camera
make
US: American, (res.640x512)
EU: European, (res.640x480)
WWP US 640 SNL 128
product type
[WWP: WIRIS Pro]
Figure 1 – Product ar cle label structure.
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
thermal
camera
sampling
rate
[S: <9Hz]
[F: <30Hz]
thermal built in
camera thermal
horizontal lens
resolu o n [NL: no lens
¢
[640px]
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
SSD
storage
size
in GB
[128GB]
[256GB]
exchangeable]
¡
Revision 1.2 EN, 22 nd Mar, 2019
All pictures are only for illustra on.
Real values may vary.
2