Energy Saving Tips - AEG OKO-SANTO series Operating Instructions Manual

Automatic refrigerator
Hide thumbs Also See for OKO-SANTO series:
Table of Contents

Advertisement

Switch the appliance off and remove the plug from the mains, or
switch off or turn out the circuit breaker or fuse.
Clean the appliance and the interior accessories with a cloth and luke-
warm water. Commercially available dish washing detergents may also
be used.
After cleaning wipe with fresh water and rub dry.
Accumulation of dust at the condenser increases energy consumption.
For this reason carefully clean the condenser at the back of the appli-
ance once a year with a soft brush or a vacuum cleaner.
Check the water drain hole on the rear
wall of the fridge. Clear a blocked drain
hole with the aid of the green peg in
the pack of accessories included with
the appliance.
After everything is dry place appliance
back into service.

Energy Saving Tips

• Do not install the appliance near cookers, radiators or other sources
of warmth. High ambient temperatures cause longer, more frequent
operation of the compressor.
• Ensure sufficient air circulation and exhaust at the appliance base
and at the back wall of the appliance. Never cover air vent ope
nings.
• Do not place warm foods into the appliance. Allow warm foods to
cool first.
• Only leave door open as long as necessary.
• Do not set temperature any colder than necessary.
• Keep the heat emitting condenser, the metall grille on the rear wall
of your appliance, always clean.
55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Oko_santo super

Table of Contents