Operating And Indicator Panel - AEG SANTO 70338 WK User Manual

Operating and indicator panel

A. Mains pilot indicator (green)
B Button ON/OFF
G Light Button "LIGHT ON"
H LIGHT ON button
I. Alarm reset light
J. Door-Alarm OFF button
Buttons for Bottom Compartment
C Temperature setting button (for warmer temperatures)
D Temperature display
C Temperature setting button (for colder temperatures)
Buttons for Top Compartment
E Temperature setting button (for warmer temperatures)
F Temperature display
E Temperature setting button (for colder temperatures)
Temperature setting buttons
The temperature is adjusted using the "C" or "E" (+) and "C" (-) buttons. The-
se buttons are connected to the temperature display.
• The temperature display is switched over from the display of the ACTUAL
temperature (Temperature display is illuminated) to the display of the DESI-
RED temperature (Temperature display flashes) by pressing one of the two
buttons, "C" (+) / "C" (-) or "E" (+) / "E" (-).
• Each time one of the two buttons is pressed again the DESIRED temperatu-
re is adjusted by 1 °C. The DESIRED temperature must be reached within 24
hours.
If neither button is pressed, the temperature display automatically switches
back after a short period (approx. 5 sec.) to the display of the ACTUAL tem-
perature.
29