Table of Contents
Advertisement
VOLUME key/ MUTING key
Not in use for the projector.
ID MODE switch (page 29)
Sets an ID mode of the Remote Commander. If
you assign a different ID number to each
projector when multiple projectors are used,
you can control only the projector with the
same ID mode as that of the Remote
Commander.
CONTROL S output terminal
Not in use for the projector.
About Remote Commander operation
Direct the Remote Commander toward the
remote control receiver.
The shorter the distance between the Remote
Commander and the projector is, the wider the
angle within which the Remote Commander can
control the projector becomes.
If there is any obstruction between the Remote
Commander and the remote control receiver on
the projector, the projector may not be able to
receive signals from the Remote Commander.
7
Hide quick links:
Advertisement
Table of Contents
