Sony VPL-FHZ120L Operating Instructions Manual page 27

Notes
*1:  Note that if the projector is used for profit or for public viewing, modifying the original picture by switching to the
aspect mode may constitute an infringement of the rights of authors or producers, which are legally protected.

Depending on the input signal or "Screen Aspect" setting, setting items for aspect ratio or some other setting items
cannot be set in some cases, or changing the aspect ratio setting may have no effect.
 A part of the image may be displayed in black, depending on the setting item.
*2: Available when a video signal is input from the YP
terminal, HDBaseT input terminal, or optional adaptor.
*3: Available when "Aspect" is "Zoom" and "Screen Aspect" is 16:10 or 16:9.
*4: Available when a computer signal is input from the RGB input terminal (INPUT A, INPUT B) or a video signal is input from
the YP P input terminal (INPUT A). This option is available only when "Aspect" is set to "Zoom."
B R
*5: Available when a computer signal is input from the RGB input terminal (INPUT A, INPUT B).
*6: If the projected image includes a large amount of black portion around it, the APA function will not work properly and a
part of the image may not be displayed on the screen. In addition, an optimum image cannot be obtained, depending
on the type of input signal. In this case, adjust the "Phase," "Pitch," and "Shift" items manually.
Aspect
Input signal
(4:3)
(16:9)
(16:10)
(4:3)
(16:9)
P input terminal (INPUT A), DVI-D input terminal, HDMI input
B R
Recommended setting value
and projected image
*1 *2
(Full 1)
*1 *2
(Full 1)
*1
(Full 1)
*3*5
(4:3)
*4 *5
(16:9)
*1: If you select "Normal," the image is projected in the
same resolution as the input signal without changing
the aspect ratio of the original image.
*2: If you select "Full 2," the image is projected to fit the
projected image size, regardless of the aspect ratio of
the image.
*3: Depending on the input signal, the projected image
may be projected as illustrated below. In this a case,
select "16:9."
*4: Depending on the input signal, the image may be
projected as illustrated below. In this a case, select
"Zoom."
*5: If you select "Full," the image is projected to fit the
projected image size, regardless of the aspect ratio of
the image.
27