Troubleshooting - AEG Electrolux smart 300 Operating Instructions Manual

Troubleshooting

Power: If the electric power does not
come on, disconnect from mains and
check plugs, cable and fuses where
appropriate.
Blockages/dirty filters: The cleaner
may switch itself off in the event of
a severe blockage or excessively dirty
filter(s). In such cases, disconnect
from mains and allow to cool for
20-30 minutes.
Clear blockage and/or replace
filter(s) and restart.
The cleaning of blocked hoses is not
covered by the guarantee.
Water: If water is sucked into the
cleaner the motor must be changed
at an AEG-Electrolux Service Centre.
Please also see AEG-Electrolux
additional information in the
separate AEG-Electrolux Warranty
Booklet.
The symbol on the product or
on its packaging indicates that this
product may not be treated as
household waste. Instead it shall be
handed over to the applicable
collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed
of correctly, you will help prevent
potential negative consequences for
the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product. For more detailed
information about recycling of this
product, please contact your local
city office, your household waste
disposal service or the shop where
you purchased the product.
12