Table of Contents
Advertisement
The cooler needs air
The cooler door seals the installation unit almost completely, so an air vent is provided
in the base of the housing. Warmed air must be conducted via the ventilation shaft
to the rear wall of the housing and then expelled upwards. The ventilation channels
should measure at least 200 cm
2
in cross-section.
2
min. 200 cm
50
2
min. 200 cm
Warning! To ensure the proper functioning of the appliance, air vents should never
be blocked or covered.
Installation
Scale drawing
2
200 cm
547
566
550 min.
50
874–880
560 min.
873
2
200 cm
6
Advertisement
Table of Contents
