Installation - Electrolux WASL2E 200 User Manual

After the check, activate the appliance. The
programme continues from the point of in-
terruption.
If the problem occurs again, contact the
service centre.
If the display shows other alarm codes,
contact the service centre.
SERVICE

INSTALLATION

UNPACKING
1. Use the gloves. Remove the external
film. If necessary, use a cutter.
2. Remove the cardboard top.
3. Remove the polystyrene packaging
materials.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ...
Refer to the information supplied with this
appliance for guarantee condition and point
of contact. The information to give to the
service is on the rating plate.
We recommend that you write the information
here:
Model
(MOD.)
Product number
(PNC)
Serial number
(S.N.)
4. Remove the internal film.
5. Open the door. Remove the polystyr-
ene piece from the door seal and all the
items from the drum.
electrolux 51
..................
..................
..................