Electrolux WASL2E 200 User Manual page 37

M
START/PAUSE BUTTON
4
Press button to start or interrupt a pro-
gramme.
DELAY START BUTTON
5
Press button to delay the start of a pro-
gramme from 30 minutes to 20 hours.
TIME SAVE BUTTON
Press button 6 to decrease the duration of
the programme.
– Press one time to set 'Shortened dura-
tion' for items with daily soil.
– Press two times to set 'Extra Quick' for
items with light soil.
Some programmes accept only one of
the two functions.
EXTRA RINSE BUTTON
7
Press button to add rinsing phases to a
programme.
Use this function for persons allergic to de-
tergents and in areas where the water is
soft.
THE STAIN-PREWASH BUTTON
8
Press button to add the stain and/or a
prewash phase to a programme.
Press the button again and again to acti-
vate one or two options. The related sym-
bol and the indicator bar comes on in the
display.
STAIN
• Use this function for laundry with hard
stains to remove.
When you set this function, put the stain
remover into compartment
The indicator bar is fully filled when you set the maximum number of
rinses.
The Stain symbol comes on when you activate the function.
The Prewash symbol comes on when this function is activated.
The indicator bar is not fully filled when you set only one of the func-
tions.
The indicator bar is fully filled when you set the two functions.
4
5
6
7
8
. This
function increases the programme dura-
tion.
This function is not available with a
temperature lower than 40° C.
PREWASH
• Use this function to add a prewash
phase before the washing phase. We
recommend that you use this function
when you have laundry with a high level
of soil.
The set of this function increases the
programme duration.
9
SPIN BUTTON
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set pro-
gramme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the water
when the programme is completed.
TEMPERATURE BUTTON
10
Press button to change the default tem-
perature. When the display shows
the appliance does not heat the water.
ACOUSTIC SIGNALS FUNCTION
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
electrolux 37
10
- -,