Using Different Printing Modes - LeapFrog Bolt Pro User Manual

5.3

USING DIFFERENT PRINTING MODES

The Bolt Pro is fitted with two independent print heads. These Independent Dual
Extruders can work in three different modes. NORMAL both heads work together to print
a multi-material or multi-colour print. SYNC mode, both print heads print an identical
part. MIRROR mode, both print heads print a mirrored part.
PRINTING MODE BED PLACEMENT
When printing in Sync or Mirror mode, the Bolt Pro will automatically duplicate or mirror
your G-code and part. Therefore, only half of the build volume can be used when slicing
an STL to G-code. When creating a G-code suitable for Sync and Mirror mode, be sure
to place the part or parts on the Left half of the Print bed.
33