Maintenance - Makita VC1310L Instruction Manual

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Storage of power supply cord
For Model VC1310L only
Fig.27
Fig.28
Pull out the cord hook or open the base hook. Wind up
the power supply cord and hang it on the cord hook or
wind it around the base hook.
NOTE:
Do not force the power supply cord off the cord
•
hook when trying to disconnect it from there.
Forcing power supply cord to disconnect from the
cord hook may cause damage to the cord
For Models VC2510L and VC3210L
Fig.29
Fig.30
Wind up the power supply cord around the base hook.
Storage of accessories
NOTE:
Do not apply an excessive force to the accessories
•
that are held by the pipe holder. Applying an
excessive force to these accessories may cause
damage to the pipe holder.
For Model VC1310L only
2
3
1. Straight pipe
2. Corner nozzle
3. Pipe holder
011612
Pipe holder can be used to store straight pipe, bent pipe,
corner nozzle and similars by just inserting these
accessories.
1. Stopper
2. Pipe holder
011613
The pipes can be placed into the pipe holder when also
stopping using the cleaner on the way for a while.
12
1
1
2