Operation - Makita AT1150A Instruction Manual

► 1. Lock pin 2. Pusher
2. Insert strip of staples into the magazine. Two
strips of staples can be loaded.
3. Depress the lock pin lightly and pull the pusher to
unhook it.
With the lock pin depressed, return the pusher
slowly and gently to the original position.
Keep depressing the pusher until it passes
through.
► 1. Pusher
1
2
1
Connecting air hose
► 1. Air fitting 2. Air socket
Slip the air socket of the air hose onto the air fitting on
the stapler. Be sure that the air socket locks firmly into
position when installed onto the air fitting. A hose cou-
pling must be installed on or near the tool in such a way
that the pressure reservoir will discharge at the time the
air supply coupling is disconnected.

OPERATION

CAUTION:
• Make sure all safety systems are in working
order before operation.
1. Pull the trigger first and then place the contact
element against the workpiece.
1
2
► 1. Trigger 2. Contact element 3. Workpiece
6 ENGLISH
1
2
3