Advertisement
9
● Locate the Wing Tube and slide it
into the fuselage.
● Pull the aileron servo leads into
the fuselage and install the wings.
Lightly sand the end of the wing tube to fit
more smoothly into the wing panel.
Wing Tube
10
● Canopy Installation
1. Put Dowel in
16
！ If the wing tube fits
tight, lightly sand the
hole with sandpaper
until it fits.
！ Insert straight.
2. Slide the tab to the back.
● Use both wing bolts to
secure the wings.
Insert a wing tube attentively.
■ When wing receives damage, it's dangerous.
Don't forget to screw the wing bolts into the model.
■ If the wing bolts are left out, the wing will fall off mid-flight.
3.Slide the tab to the front
to lock the Canopy.
● Connect the
aileron servo
leads.
Advertisement
