Advertisement
4
● Wick CA glue into the paper hinges
on the elevator side.
CA glue
！ Make glue wick to the interior.
● Insert the Elevator.
● Insert the Horizontal Stabilizer.
10
Paper Hinges
Elevator
！ I n s e r t t h e
elevator so that
t h e h o r n w i l l
face the bottom.
● Move the elevator into the
elevator deflection slot.
！ Be careful to insert in the
correct orientation (front to
back-upright/inverted).
● Fit the paper hinges into the elevator,
making sure that you align each one.
● Make it the same length.
● Glue the stabilizer by CA glue.
● Glue from the underside as well
● Hold vertical in the direction that you want to
glue to wick into the paper hinge and surface.
CA glue
！ Make glue wick to
the interior.
● Fit the elevator tightly and
deflect it a few times in
both directions.
CA glue
● Move the elevators
after drying.
Advertisement
