Disassembly For Repair - Kenwood TK-3000 Service Manual

DISASSEMBLY FOR REPAIR / 维修拆卸
1. Separating the Case Assembly from the
Chassis
1. Remove the two knobs ( a ).
2. Remove the two screws ( b ).
3. Expand the right and left sides of the bottom of the case
assembly, Iift the chassis, and remove it from the case
assembly ( c ).
4. Taking care not to cut the speaker lead ( d ), open the
chassis and case assembly.
Note:
Solder the speaker wire back in its original position if you
have removed it.
b
b
c
–
+
1. 从机架上分离外壳
1. 取下两旋扭 ( a )。
2. 取下两颗螺钉 ( b )。
3. 掀开外壳底部的左右两侧， 取下机架， 并外壳中取出 ( c )。
4. 小心不要折断扬声器引线 ( d )。拆下机架和外壳。
注意 :
如果取下了扬声器的导线，请将其焊接到原位上。
a
a
d 褐色
BRN /
绿色
GRN /
TK-3000
9