3.2.3 Specifying the Nominal Thickness
When the VIEW parameter is set to DIFF/RR%, the displayed thickness includes two differential values (in the instrument's units and as a
percentage) that represent the variation from user specified nominal thickness (see Section 4.4). To manually input or modify the nominal
thickness:
1.
Press
.
2.
Select the NOM THICKNESS control.
3.
Press
to activate the control, then use
4.
Press
after the adjustment is complete.
DM5E Operating Manual
or
to adjust the selected place value and
Chapter 3. Setting Up the DM5E
or
to select a different value.
25