Entering The Menu; Day Or Night Operation; Boiler Activation Selection; Presence Selection - olympia electronics BS-850/T Manual

GENERAL
When the plastic battery separator is
removed the unit is automatically activated
and shows all the screen indicators for
1",then the firmware version is shown and
finally the screen enters final operation
status. In the center of the screen you can
see the current temperature. The clock has
the hour 00:00, the date is 1 January
(Friday) 2016 and the thermostat is inactive
(OFF state). In this state the only available
s e l e c t i o n s a r e B o i l e r a c t i v a t i o n
/deactivation (only for BS-851/ΚΙΤ) and
entry to the settings menu. If the
pressed momentarily, the screen
illumination will be activated for 2" and the
symbols , and ΜΑΝ will be shown
which are the factory defaults.
1. ENTERING THE MENU (the thermostat
in the OFF state).
To enter the menu settings press the
button MENU for more than 3".
ENTER
The screen will be illuminated and will stay
illuminated during all the duration of the
settings To navigate through the menu .
items use the keys
change the value of a menu item use the
keys and
accept the change or press the
go to the previous state. By pressing again
the key our settings are saved. If no
ESC
key is pressed for 2 minutes then the
thermostat returns to normal operation
while saving the changed settings.
2. SELECTING DAY OR NIGHT
OPERATION MODE
(the thermostat is in the ON state and in
manual operation).
If the key is pressed for more than 3"
then the indication is deactivated and
you can see the
operation mode has been selected. This
selection replaces temporarily the manually
selected temperature for as long as the
night program is active. If one of the
keys or
night program temperature is shown. (this
can be changed from the setting
of the ΜΕΝU). The factory default night
Page 5 from 13
key is
and
MENU
. Press the key to
ENTER
key to
ESC
. This means that night
is pressed then the set
(night)
temperature is set to 18.0ºC. To deactivate
the night program, press the
more than 3", the symbol
the symbol
3. Boiler ACTIVATION (available only on
the BS-851/T).
This capability can be executed by pressing
briefly the
activated for 2" and the
shown on the top left corner of the screen.
The built-in relay will send the command to
the burner. The command will be active for
as long as it has been preselected via the
ΜΕΝU setting with the indication
(Boiler time), or until the
pressed again. If the preselected Boiler
value is 00 then the deactivation can be
done only with the key. The Boiler
command is independent from the other
functions of the device and can be given
even if the thermostat is deactivated (OFF
state). The factory default Boiler time is 00
minutes.
4. AREA PRESENCE SELECTION (The
thermostat is in the ON state).
. To
In normal operation, the symbol
the presence of people in the area and all
the programs, which ever are selected, are
executed normally. In limited absence from
the area (from a few hours to a few days)
there is the capability to execute the
absence program.
If the
ESC
backlight will be activated for 2" and the
symbol
command superimposes every other
program. The selected temperature is
shown on the screen if any of the
keys is pressed and can't be changed.
The value can be changed only with the
selection
ΜΕΝU. The factory default setting of this
temperature is 16.0 ºC and can be altered
from 6.0 to 30.0 ºC. To deactivate the
absence mode, the
pressed for 3", then the thermostat will
continue the execution of the program that
was running before absence mode was
selected.
is replaced by
.
key, the backlight will be
symbol will be
key is pressed for 3", the
will be changed to
(Absent temperature) of the
key must be
ESC
940851000_09_001
key for
key is
shows
.This
or