Advertisement
28
27
26
1
2
3
4
5
6
7
8
DESCRIPTION OF CONTROLS -
INDICATORS
.Thermostat activation key
1
.Thermostat deactivation key
2
.Increase value
3
.Decrease value
4
.Presence indicator
5
.Thermostat active indicator
6
.Thermostat inactive indicator
7
.Battery status indicator
8
.Temperature rise or fall indica t o r
9
= when the selection is smaller that the
actual temper
= When the selection
greater than the actual temperature.
= When the temperature is in the range
between the selection and the selection + the
deferential.
Page 1 from 10
PROGRAMMABLE CHRONO - THERMOSTATS
PROGRAMMABLE CHRONO - THERMOSTATS
Thank you for your trust in our products
Olympia Electronics - European manufacturers
25
24
23
22
21
MENU
ENTER
ESC
9
10
11
12
13
the differential is
+
BATTERY OPERATED
BATTERY OPERATED
Extended battery life (>3 years).
3 operation modes: manual, daily, weekly.
Easy operation via 8 keys.
Easy programming.
Multi function LCD with backlight.
Clock, calendar.
Keyboard lock.
Upper and lower limit settings.
Manual temperature selection.
Boiler option (BS-813) with adjustable time.
Heating and cooling function.
The key
is like this
. Hour and message display
10
. Temperature and message display
20
11
. Temperature unit display
12
19
. Burner active indicator
13
18
. Presence program selection indicator
14
17
. Cancel/exit from selection
15
16
. Boiler activation / deactivation (valid
16
15
only for BS-813)
. Go to the next selection or value
17
14
. Select normal or night program
18
. Go to the previous value or selection
19
. Select and confirm installation settings
20
. Daily program indicator
21
. Weekly program indicator
22
. Manual program indicator
23
. Day indicator
24
. Night program indicator
25
. Burner activation indicator
26
. Boiler activation indicator
27
. Normal program indicator
28
on the BS-812,BS-814.
940813000_09_012
Advertisement
Table of Contents
Related Manuals for olympia electronics BS-812
Summary of Contents for olympia electronics BS-812
- Page 1 Upper and lower limit settings. Manual temperature selection. Boiler option (BS-813) with adjustable time. Heating and cooling function. Thank you for your trust in our products Olympia Electronics - European manufacturers The key is like this on the BS-812,BS-814. . Hour and message display .
-
Page 2: Entering The Menu
GENERAL MENU). The factory default for this When the plastic battery separator found temperature is 18.0ºC. To deactivate night between the two batteries is removed then mode press and hold the key for more the device is activated and all the symbols that 3". -
Page 3: Keyboard Lock
5. KEYBOARD LOCK (in any operation With the key we can return to the initial mode). screen with the blinking. With MENU If the keys are pressed consecutive presses of the key we can ENTER simultaneously (first then ) for MENU select the remaining programs in the 24 ENTER... -
Page 4: Other Menu Settings
Depending on the selection, the symbol ºC day else the factory default temperature of 23.0 ºC will be used for all the 24 hour base. or ºF are shown on the center right of the screen. 9. SELECTING THE UPPER AND LOWER (Back Light) SCREEN ILLUMI- L I M I T S T H E... - Page 5 (Heat/Cold). SELECTING HEA- 13. CLEANING THE THERMOSTAT To clean the device use a damp cloth to TING /COOLING MODE. This setting determines the operation mode remove any dust or stains from the covers. of the thermostat which can be heating or Do not use any liquid or dissolvers that will cooling.
-
Page 6: Daily Programming Example
Burner activation indicator = Active (On) has a 10 program capability. Absence program = Presence 7. Press the key MENU and the screen ENTER Manual selection time= 3 hours shows with the blinking, this shows Upper manual temperature limit = 30.0°C that we are in program 1 of the daily Lower manual temperature limit= 6.0°C program. -
Page 7: Technical Characteristics
Dimensions in millimeters Dimensions in millimeters 81,3 Mounting hole spacings 121,5 27 ,3 TECHNICAL CHARACTERISTICS TYPE BS-812 BS-813 BS-814 BATTERIES 2 Alkaline ΑΑ TEMPERATURE MEASUREMENT RANGE 0.0 to 99.9 C TEMPERATURE SELECTION RANGE 6.0 to 30.0 C FREE RELAY CONTACT 5Α... - Page 8 Installation procedure Installation procedure Pre-etched entrance for the connection cable (must be removed before thermostat’s installation) Alignment vial Retaining screw entrance Retaining screw entrance Photo 1 (The following procedure must be done with the main power supply isolated) 1 To install the device, use a flat blade screwdriver to pry up the cover, with the same width as the plastic opening (photo 2).
-
Page 9: Electrical Connections
Electrical connections Electrical connections BS-812 Neutral blue wire (Ν). IS NOT CONNECTED Live Brown wire (L) 230V~ To burner (L) mains (Previous thermostat installation) For new installation a third wire for neutral N is not required (2 wire connection). The installation MUST be performed by an authorized electrician. -
Page 10: Warranty
Olympia Electronics or if the buyer modifies the goods provided or has any repairs or re-setting done by a third party, unless Olympia Electronics has fully agreed to them in writing. Products that have been damaged can be returned to the premises of our company for repair or replacement, as long as the warranty period is valid.