Setting Up A Managed Device With Ironkey Ems - Kingston Technology IRONKEY D300SM User Manual

Setting Up A D300SM Device With SafeConsole
The initialization process will begin by allowing the device to be ready to communicate with the
SafeConsole server. The steps needed to register a D300SM to SafeConsole will depend on the
policies that your administrator is enforcing. Not all dialogs will be shown.
A SafeConsole Connection Token will be needed. The SafeConsole Connection Token is obtained
by the System Administrator through the Quick Connect Guide, located inside of the SafeConsole
user interface.
1. Enter the SafeConsole Connection Token that is obtained in the steps above. Review the
license agreement, check the checkbox to accept it, and click Activate in the bottom
left-hand corner.
• Optionally Enabled Policies - These policies may or may not be enabled by your System
2. Enter a secure Password and Confirm it. Once the password created meets the requirements
listed to the right side of the input fields, click Continue. The requirements of this password will
depend on the policy selected by your administrator.
3. Choose a Secure Volume File System (see
4. The device will now finalize the setup process and be ready for use. Access the Encrypted
Storage by clicking the Folder Icon in the top menu. The settings of the device can be
accessed and altered by clicking the Gear Icon. See the
information.

Setting Up A Managed Device With IronKey EMS

The initialization process will begin by allowing the device to be ready to communicate with the
IronKey EMS server.
An IronKey EMS Activation Code will be needed. The IronKey EMS Activation Code is obtained by
the System Administrator through the IronKey EMS Console. This code can also be emailed to the
end user.
1. Enter the IronKey EMS Activation Code that is obtained in the steps above. Review the license
agreement, check the checkbox to accept it, and click Activate in the bottom left-hand
corner.
2. Enter a secure Password and Confirm it. Once the password created meets the requirements
listed to the right side of the input fields, click Continue.
Administrator. They will appear during device registration if they have been enabled.
– Confirm Ownership of the device: Enter the Windows username and password that is
associated with the login credentials of the computer the device is plugged into.
– Unique User Token: This token is directly associated with the end user's account and
will be provided by the System Administrator.
– Administrator Registration Approval: The System Administrator may require their
approval to proceed with device registration.
Formatting My Device) and click Continue.
IronKey Control Panel for more
8