Set Contents - FUTABA Big SkyLeaf Instruction Manual

1
Required for flight (Purchase separately)
● Transmitter/Receiver (More than 6 channels)
（e.g. Futaba 10J, 12K, 14SG, 16SZ, 18SZ, 18MZ）
● Receiver battery
● Extension code
● Gasoline Engine 60cc（O.S.GT60, etc.）
● O.S. M5 Stand-Off mount 50.8 mm（O.S.GT60）
● Silencer
● Fuel tank (700 cc)
● Gasoline fuel + Oil
● Fuel silicon tube for gasoline（Nipple, fuel stopper）
● Igniter battery
● Propeller（23 × 10 ∼ 24 × 8）
● Spinner（4 in.）
2

SET contents

Canopy ＆ Hatch
Cowling
Wing left
Aileron
Main gear
Wheel
Wheel pants
バルサ角棒
Fuselage
Horizontal stabilizer
Wheel
Wheel pants
● Exacto Knife
● Wire cutter
● Needle nose pliers
● Scissors
● Screwdriver
● Hex key
● Drill
● Tape
● CA glue
● Epoxy Adhesives
● Magic Marker
● Iron
● Hook-and-Loop Tape
● Sandpaper
● Grease etc.
Wing tube
Wing right
Aileron
Horizontal stabilizer tube
Horizontal stabilizer
Elevator Elevator
Be careful as the film
will be damaged if it
gets too hot.
Rudder
7