FUTABA Big SkyLeaf Instruction Manual page 9

3
Main wing
1. Installation of Ailerons
1 1
● Cut the film of the main wings and
ailerons hinge hole.
2
● Grease up to the moving part of
the hinge.
● Do not allow grease to adhere to
the insertion part.
3
● Attach the wing to the hinges with Epoxy
glue.
＜ Aileron ＞
！ Attention to the axial
direction of the hinge.
！ Epoxy adhesive should not
adhere to moving parts.
！ Do not allow grease to adhere
to the insertion part.
Sky Leaf Tip
2-Wings
● Hinge
4
● After the adhesion has dried, pour a suitable amount
of Epoxy glue into the hinge hole of the wing and
insert aileron into the wing.
Take clearance between Aileron and Wing (about 1 mm).
(So that Aileron and Wing do not interfere during operation)
！ Epoxy adhesive should not
adhere to moving parts.
5
● Move the aileron after drying. Check that the
aileron is securely attached.
● Attach the aileron to the other main
wing by the same work.
Make glue wick to the interior.
9