Hach SP-510 Basic User Manual page 150

Ovaj simbol naznačuje opasnost od požara.
Ovaj simbol, ako ga vidite na proizvodu, označava lokaciju osigurača ili automatskog osigurača.
Certification
Canadian Radio Interference-Causing Equipment Regulation, IECS-003, Class A:
Supporting test records reside with the manufacturer.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de classe A répond à toutes les exigences de la réglementation canadienne
sur les équipements provoquant des interférences.
FCC Part 15, Class "A" Limits
Supporting test records reside with the manufacturer. The device complies with Part 15 of the FCC
Rules. Operation is subject to the following conditions:
1. The equipment may not cause harmful interference.
2. The equipment must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this equipment not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. This equipment has been tested
and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be required to
correct the interference at their expense. The following techniques can be used to reduce
interference problems:
1. Disconnect the equipment from its power source to verify that it is or is not the source of the
interference.
2. If the equipment is connected to the same outlet as the device experiencing interference, connect
the equipment to a different outlet.
3. Move the equipment away from the device receiving the interference.
4. Reposition the receiving antenna for the device receiving the interference.
5. Try combinations of the above.
Pregled proizvoda
Kemijska ili biološka opasnost. Koristi li se ovaj instrument za praćenje postupka liječenja i/ili sustava
kemijskog punjenja za koji postoje zakonska ograničenja i zahtjevi nadzora povezani s javnim
zdravstvom, javnom sigurnosti, proizvodnjom ili obradom hrane ili pića, odgovornost je korisnika ovog
instrumenta da poznaje i pridržava se primjenjivih propisa i ima dovoljno odgovarajućih mehanizama za
sukladnost s primjenjivim propisima u slučaju kvara instrumenta.
Monitor tvrdoće SP-510
oslabi kapacitet omekšivača vode. Monitor je namijenjen za primjenu na komercijalnim i industrijskim
vodama. Monitor ima automatski sustav kontrole koji pokreće slijedove regeneracije pomoću
alarmnog strujnog kruga.
Tvrdoća se mjeri na različitim razinama kao CaCO
reagensa. Relej se zatvara kada instrument izmjeri vrijednost tvrdoće koja premašuje točku
aktivacije. Pregled proizvoda možete pronaći na
150 Hrvatski
O P A S N O S T
™
neprekidno mjeri razine omekšivača vode te otkriva proboje tvrdoće kada
pomoću odgovarajućih otopina indikatora i
3
Slika 1.