Siemens SINAMICS S 1PH7 Configuration Manual page 20

Motor description
1.2 Technical features
Technical feature
Shaft end to DIN 748–3 (IEC 60072–1)
Bearing version DE (standard)
Radial eccentricity, concentricity, and axial
eccentricity acc. to DIN 42955, IEC 60072–1)
Vibration severity acc. to IEC 60034–14
Paint finish
Documentation supplied with the motors
Options
S/R =
20
Version
With keyway and feather key, plain shaft
(see Selection and ordering data)
SH 100 to 160 for belt
coupling and coupling
output:
SH 180 to 225
for coupling output:
for belt coupling or
increased radial forces:
SH 100 to 160:
SH 180 to 225:
Level A is maintained up to the nominal limit
SH 100 to 160:
SH 180 to 225:
See "Options" table
Operating instructions (German, English)
See "Options" table
Signals/Revolution
Deep-groove ball bearings
Deep-groove ball bearings
Cylindrical-roller bearings
Tolerance level R (reduced)
Tolerance level N (normal)
Without paint finish,
Standard paint finish, anthracite RAL 7016
Primed,
Standard paint finish, anthracite RAL 7016
1PH7 induction motors (Machine tools)
Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0