Printing / Pressing - Happy Fabric HappyPress 2.1 Operating Manual

USER MANUAL
When your press has reached the set temperature:
1. Place the textile on the bottom plate of the press.
2. Align the transfer on the textile and close the press completely.
By simply resting on both handles (recommended), sufficient pressure is applied.
3.
4. If the timer button is activated, the set time automatically stops and a beep
sounds when the preset time has elapsed.
5. Open the HappyPress after the beep. The beep disappears after opening or by
deactivating the timer button. The activated timer starts again when the press is
closed again.
6. The time will automatically return to the one you specified after printing.
7. Set time so that the press is ready for printing immediately after printing.
8. Turn off the press with the ON / OFF switch after use, by turning the switch to the
OFF position (O). The switch does not light up anymore.
Never leave the press switch on in the closed position.
Always leave to cool down in the open position.
28