Page 9
Attaching To Chassis (25) Releasing From Chassis Do not use this car seat in seating positions where the frontal (26) airbag is activiated.
Page 10
Notice: It is dangerous to make any alterations or additions 1. This is an "i-Size" Child Restraint System. It is approved to the device without the approval of the Type Approval to Regulation No.129, for use in "i-Size compatible" Authority, and a danger not to follow the installation vehicle seating positions...
Page 11
15. Take the child out of the car seat as often as Installing the car seat with ISOFIX base : possible in order to relieve pressure from their spine. Loosen should er belts by pressing the Centre 16. Please contact the distributor or manufacturer to function adjustment button and simultaneously pulling replace or supplement any components that may both shoulder belts up (Picture 9).
Page 12
Installing the car seat with vehicle seat belt Uninstallation of the carrier and base 1. Place the infant car seat onto the vehicle seat, facing 1. To remove the car seat from the base, press the the rear of the vehicle. The seat is not suitable for use Release button while lifting the car seat by the handle.
Page 13
Warranty THE WARRANTY IS NOT VALID IN THE FOLLOWING We guarantee that this product was manufactured in CASES: accordance with current European safety requirements and quality standards applicable to this 1. In the case of a use or purpose other than described in product, and is free from defects in workmanship the manual.