Download  Print this page

Honeywell CSS-O-A300-001 Manual

Solid core and split core adjustable current “status” switches
Hide thumbs
   

Advertisement

Quick Links

Solid Core and Split Core Adjustable
Current "Status" Switches
CSS-O, CSS-C; CSP-O, CSP-C

DESCRIPTION

The CSS solid core and the CSP split core current switches
have either Normally-Open (N.O.) or Normally-Closed (N.C.)
output configurations. All of these sensors will have a solid-
state output with an adjustable trip point (setpoint). These
current switches are ideal for providing status information on
any type of AC current using equipment. The CSS series
current switches are an excellent choice for new installations.
The CSP series current switches are ideal for retrofit or
existing installations since it is not necessary to power down
the unit and disconnect any wires during the installation
process. The CSS and CSP current switches are accurate,
reliable, easy to install and require less servicing than
differential pressure switches, flow switches and paddle
wheels.

FEATURES

• Very low operating trip points
• LED status indication
• Integral DIN rail mounting flange
• Easy wiring, non-polarity sensitive
• Accepts up to a 350 MCM (17.3 mm) cable
• Operates up to 200 or 250 continuous amps
• RoHS and WEEE compliant
• Limited five year warranty
These current switches should be used in applications in
which a current switch with adjustable trip point is required. A
current switch can be used to monitor fan and pump status,
motors, compressors and electrical equipment for proper
operation. A change in the operating current may indicate
motor failure, belt loss/slippage or mechanical failure. Any
time one of these events occur the current can significantly
increase or decrease, thus tripping the sensor and notifying
building management of an alarm condition.
The CSS and CSP series current switches can be used to
monitor devices with a maximum continuous operating current
of up to 200 or 250 Amps depending on the model. These
switches will not need to be externally powered since the
power for the switch is induced from the conductor being
monitored. Another great feature of the CSS and CSP series
current switches is that they include both a red and green LED
that will indicate the "Status" of the switch contacts. All of
these units come with a unique 1-3/8 in. (35 mm) DIN rail
mounting flange and a limited five year warranty.
Features ............................................................................1
Description ........................................................................1
Specifications ....................................................................2
Ordering Information .........................................................2
Safety ................................................................................4
Installation .........................................................................4
Troubleshooting.................................................................6
IND.CONT.EQ.
3JHX
PRODUCT DATA
Contents
63-2651-1

Advertisement

loading

  Related Manuals for Honeywell CSS-O-A300-001

  Summary of Contents for Honeywell CSS-O-A300-001

  • Page 1: Table Of Contents

    Solid Core and Split Core Adjustable Current “Status” Switches CSS-O, CSS-C; CSP-O, CSP-C PRODUCT DATA FEATURES • Very low operating trip points • LED status indication • Integral DIN rail mounting flange • Easy wiring, non-polarity sensitive • Accepts up to a 350 MCM (17.3 mm) cable •...
  • Page 2: Specifications

    If you have additional questions, need further information, or would like to comment on our products or services, please write or phone: 1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory). 2. Honeywell Customer Care...
  • Page 3 SOLID CORE AND SPLIT CORE ADJUSTABLE CURRENT “STATUS” SWITCHES TOP VIEW 13/64 (5) TRIP TRIP TRIP TYP. TRIP ON = ABOVE TRIP POINT ADJ. RANGE: 0.8-250A OUTPUT: 0.3A @ 13/32 (10) 200 VDC/VAC 2-27/32 (72) LEFT SIDE VIEW FRONT VIEW RIGHT SIDE VIEW 25/32 (20)
  • Page 4: Safety

    A small fan operating at 0.2 Amps can be wrapped through M25291 the sensor 6 times to give you a total operating current of 1.2 Amps flowing through the CSS-O-A300-001. Another option is to use CSS-O-A200-001. Fig. 5. Wires through sensors A small fan operating at 0.2 Amps can be wrapped through...
  • Page 5 M25298 Fig. 7. Opening sensor by hand Wiring Honeywell recommends the use of a 2 conductor 16 to 22 AWG (1.3 to 0.3 mm ) shielded cable or twisted wire, copper wire only, for all current switch output applications. A maximum wire length of less than 98.4 feet (30 meters) should...
  • Page 6: Troubleshooting

    LED switches from red to green. Table 2. Resistance Readings For Good Unit. Product Number Resistance if switch is open Resistance if switch is closed CSS-O-A300-001 Greater than 1 Meg ohms Approximately 2 ohms CSS-O-A200-001 Greater than 1 Meg ohms...
  • Page 7 SOLID CORE AND SPLIT CORE ADJUSTABLE CURRENT “STATUS” SWITCHES 63-2651—1...
  • Page 8 SOLID CORE AND SPLIT CORE ADJUSTABLE CURRENT “STATUS” SWITCHES By using this Honeywell literature, you agree that Honeywell will have no liability for any damages arising out of your use or modification to, the literature. You will defend and indemnify Honeywell, its affiliates and subsidiaries, from and against any liability, cost, or damages, including attorneys’...

This manual is also suitable for:

Css-o-a200-001Css-c-a300-001Csp-o-a300-001Csp-c-a300-001Csp-c-a200-001Csp-o-a200-001