Lenovo ThinkSystem DM3000 series Hardware Installation And Maintenance Manual page 125

Table of Contents

Advertisement

– serviceproc is the Service Processor.
– storage is an ATA, FC-AL, or SAS interface that has an attached disk shelf.
– toe is a TCP Offload Engine, a type of NIC.
• mb specifies that all the motherboard devices are to be tested.
• slot slotnum specifies that a device in a specific slot number is to be tested.
• -name device specifies a given device class and type.
View the status of the test by entering the following command: sldiag device status
Step 4.
Your storage system provides the following output while the tests are still running:
There are still test(s) being processed.
After all the tests are complete, the following response appears by default:
*> <SLDIAG:_ALL_TESTS_COMPLETED>
Step 5.
Verify that no hardware problems resulted from the addition or replacement of hardware
components on your storage system by entering the following command: sldiag device status
[-dev devtype|mb|slotslotnum] [-name device] -long -state failed
Example
The following example pulls up the full status of failures resulting from testing a newly installed FC-
AL adapter:
*> sldiag device status -dev fcal -long -state failed
TEST START ------------------------------------------
DEVTYPE: fcal
NAME: Fcal Loopback Test
START DATE: Sat Jan 3 23:10:56 GMT 2009
STATUS: Completed
Starting test on Fcal Adapter: 0b
Started gathering adapter info.
Adapter get adapter info OK
Adapter fc_data_link_rate: 1Gib
Adapter name: QLogic 2532
Adapter firmware rev: 4.5.2
Adapter hardware rev: 2
Started adapter get WWN string test.
Adapter get WWN string OK wwn_str: 5:00a:098300:035309
Started adapter interrupt test
Adapter interrupt test OK
Started adapter reset test.
Adapter reset OK
Started Adapter Get Connection State Test.
Connection State: 5
Loop on FC Adapter 0b is OPEN
Started adapter Retry LIP test
Adapter Retry LIP OK
ERROR: failed to init adaptor port for IOCTL call
ioctl_status.class_type = 0x1
ioctl_status.subclass = 0x3
ioctl_status.info = 0x0
Started INTERNAL LOOPBACK:
.
Chapter 7
System level diagnostics
119

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinksystem dm5000 series

Table of Contents