Preparation; Making Connections; Assembling The Am Antenna - Tascam CD-400U Owner's Manual

Making connections

This is an example of CD-400U connections.
Precautions before making connections
0 Carefully read the operation manuals of the devices to be connected and then connect them correctly.
0 Before making connections, turn this unit and all equipment to be connected off (standby).
0 Install all connected devices, including this unit, so that they are powered from the same line. When using a power strip or similar de-
vice, be sure to use one that has high current capacity (thick cable) in order to minimize fluctuations in power voltage.
FM antenna
AM antenna

Assembling the AM antenna

To assemble the AM antenna, rotate the antenna base in the direction of the arrow, and insert the hook at the bottom of the antenna
loop into the long hole in the antenna base.
Portable audio player
R L R
ANALOG ANALOG
IN IN
(UNBALANCED) (UNBALANCED)
Mixer, recorder, amp, etc.
1 2
Antenna base
3 – Preparation
Computer
L R L
ANALOG IN
(BALANCED)
3
Hook
Headphones
19
TASCAM CD-400U