Bell 36028 User Manual page 14

7. Press the SAVE/PHONE BOOK button to confirm.
IMPORTANT: It is not advisable to save a telephone number without the corresponding name in the
Phonebook. This will lead to improper displays on Private and Out of Area calls.
NOTE: When no active buttons are pressed for 20 seconds, the
automatically return to STANDBY mode.
PLACING CALLS FROM THE PHONEBOOK
1. Press the SAVE/PHON E BOOK button.
2. Press the UP Or DN button to find the one you want to call.
3. Press the TALK, button to dial out the telephone number.
4. Start your conversation.
5. To end your conversation, either press the TALK button or place the handset on the base unit.
NOTE: Be sure to check that the line is not in use by another extension.
DELETING A STORED NUMBER
1. Press the SAVE/PHONE BOOK button.
2. Press the UP OF DN button to find the one you want to delete.
3. Press the RE/PA/DEL button. The unit will ask you to delete the selected telephone number and the
LCD Display will show "ERASE ITEM?".
ERASE ITEM?
604-555-1212
4. Press again the "RE/PA/DEL button to delete. The LCD Display will show "ERASED".
5. Press the SAVE/PHONE BOOK button to return to STANDBY mode.
MIXED MODE DIALING (Temporary Pulse to Tone Dialing)
1. If you only have pulse (rotary dialing) service in your area and want to access Tone services (Bank
by Phone , etc.), ensure that the Tone/Pulse switch on the bottom of the base unit is set to the Pulse
position.
2. Press the TONE(*) button once to switch from Pulse to Tone dialing temporarily.
Pulse dialing mode resumes when the call is ended.
PAUSE FUNCTION
• In some cases, such as PABX or long distance service, a pause may be needed in the dialing
sequence. Pressing the handset RE/PA/DEL button inserts the programmed time interval between
dialed numbers.
FLASH FUNCTION
• Used to access custom calling features such as Call Waiting or Three-Way Calling
provided by your local phone company. Flash can also be used to restore a dial tone to make a new
call.
CHANNEL SELECTION(40 Channels)
• Your cordless telephone lets you select a channel from the 40 frequencies available to transmit
signals between the base unit and handset. If the existing channel becomes noisy or starts having
interference, you can either move closer to the base unit or press the MENU/SCAN button on the
handset until a better reception is found.
13
1 TOTAL20
LCD Display will
030206A-1