Fujitsu PRIMERGY User Manual page 39

2) When the setting value in the SCSISelect utility is changed, a message "Save
Change Made?" is displayed. To save it, move the cursor to [Yes]. To abandon it,
move the cursor to [No]. Then, press the [Enter] key. Finally, press [Esc] key.
(If the setting value is not changed, a message "Save Change Made?" is not
displayed.)
3) When "Exit Utility?" is displayed, move the cursor to [Yes] and press the [Enter]
key.
4) If "Please press any key to reboot" is displayed, press any key.
5) The SERVER is rebooted.
Note
If the setting value in the SCSISelect utility is changed, the changed value is
not effective unless the SERVER is rebooted.
E
9