Lancia Voyager 2014 Owner's Handbook Manual page 97

Voice Command Tree
Refer to "Voice Tree" in this section.
Cancel Command
At any prompt, after the beep, you
can say "Cancel" and you will be re-
turned to the main menu. However, in
a few instances the system will take
you back to the previous menu.
Help Command
If you need assistance at any prompt,
or if you want to know your options at
any prompt, say "Help" following the
beep. The Uconnect® Phone will play
all the options at any prompt if you
ask for help.
To activate the Uconnect® Phone
from idle, simply press the
and follow the audible prompts for
directions. All Uconnect® Phone ses-
sions begin with a press of the
ton on the radio control head.
Pair (Link) Uconnect® Phone To
A Mobile Phone
To begin using your Uconnect®
Phone, you must pair your compat-
ible Bluetooth® enabled
phone (refer to "Compatible Phones"
section to learn about the phone
type).
To complete the pairing process, you
will need to reference your mobile
phone owner's
Uconnect® website may also provide
detailed instructions for pairing.
The following are general phone to
Uconnect® Phone pairing instruc-
tions:
• Press the
• After the "Ready" prompt and the
following beep, say "Setup Phone
Pairing".
• When prompted, after the beep, say
"Pair a Phone" and follow the au-
button
dible prompts.
• You will be asked to say a four-digit
but-
Personal Identification Number
(PIN), which you will later need to
enter into your mobile phone. You
can enter any four-digit PIN. You
will not need to remember this PIN
after the initial pairing process.
mobile
manual. The
button to begin.
• For identification purposes, you
will be prompted to give the
Uconnect® Phone a name for your
mobile phone. Each mobile phone
that is paired should be given a
unique phone name.
• You will then be asked to give your
mobile phone a priority level be-
tween 1 and 7, with 1 being the
highest priority. You can pair up to
seven mobile phones to your
Uconnect® Phone. However, at any
given time, only one mobile phone
can be in use, connected to your
Uconnect® System. The priority
allows the Uconnect® Phone to
know which mobile phone to use if
multiple mobile phones are in the
vehicle at the same time. For ex-
ample, if priority 3 and priority 5
phones are present in the vehicle,
the Uconnect® Phone will use the
priority 3 mobile phone when you
make a call. You can select to use a
lower priority mobile phone at any
time (refer to "Advanced Phone
Connectivity").
91