Call Termination; Redial; Call Continuation; Uconnect® Phone Features - Lancia Voyager 2014 Owner's Handbook Manual

hear a double beep, indicating that
the two calls have been joined into one
conference call.

CALL TERMINATION

To end a call in progress, momentarily
press the button. Only the active
call(s) will be terminated and if there
is a call on hold, it will become the
new active call. If the active call is
terminated by the phone far end, a
call on hold may not become active
automatically. This is cell phone-
dependent. To bring the call back
from hold, press and hold the
ton until you hear a single beep.

REDIAL

• Press the button to begin.
• After the "Ready" prompt and the
following beep, say "Redial."
• The Uconnect® Phone will call the
last number that was dialed from
your mobile phone.
NOTE: This may not be the last
number dialed from
Uconnect® Phone.
96

CALL CONTINUATION

Call continuation is the progression of
a phone call on the Uconnect® Phone
after the vehicle ignition has been
switched to OFF. Call continuation
functionality available on the vehicle
can be any one of three types:
• After the ignition is switched to
OFF, a call can continue on the
Uconnect® Phone either until the
call ends, or until the vehicle bat-
tery condition dictates cessation of
the call on the Uconnect® Phone
but- and transfer of the call to the mo-
bile phone.
• After the ignition is cycled to OFF, a
call can continue on the Uconnect®
Phone for a certain duration, after
which the call is automatically
transferred from the Uconnect®
Phone to the mobile phone.
• An active call is automatically
transferred to the mobile phone af-
ter the ignition is cycled to OFF.
the
Uconnect® PHONE
FEATURES

LANGUAGE SELECTION

To change the language that the
Uconnect® Phone is using:
• Press the button to begin.
• After the "Ready" prompt and the
following beep, say the name of the
language you wish to switch to
(English, Dutch, French, German,
Italian, or Spanish, if so equipped).
• Continue to follow the system
prompts to complete language se-
lection.
After selecting one of the languages,
all prompts and voice commands will
be in that language.
NOTE: After every Uconnect®
Phone language change operation,
only the language-specific 32-
name phonebook is usable. The
paired phone name
language-specific and is usable
across all languages.
is not