Connecting Vcr - JVC LT-55MA888 User Manual

External Connection

Connecting VCR

These instructions assume that you have already connected your TV to an antenna or a cable
TV system. Skip step 1 if you have not yet connected to an antenna or a cable system.
VCR Rear Panel
ANT ANT OUT S-VIDEO
1
RF Cable (Not supplied)
1
YPbPr cable( Not
2
Audio Cable (Not supplied)
3
Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
1. Unplug the cable or antenna from the back of the TV.
2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.
3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the
TV.
4. Connect a Component Cable between the COMPONENT [Y, Pb, Pr] jacks on the DVD player and
YPbPr jack on the TV.
5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AUDIO L and
AUDIO R jacks on the TV.
Note:
1. Whenever you connect an external device to your TV, make sure that power on the unit
is turned off.
2. When connecting an external device, match the color of the connection terminal to the
cable.
VIDEO OUT
HEADPHONE COAXIAL LAN HDMI3
supplied)
AUDIO OUT
2
HDMI2
-14-
TV Rear Panel
3
1
RF
L
White
R
Red
AUDIO
Y/V
Green
Pb
Blue
Pr
V/YPbPr
Red
3
2