Installing Batteries In The Remote Control; Installing Batteries; External Connection; Antenna Connection - JVC LT-55MA888 User Manual

General Description

Installing Batteries in the Remote Control

Open the battery compartment
1
cover on the back side.
Insert two 1.5V AAA size batteries in
2
correct polarity. Don´t mix old or used
batteries with new ones.
3
Closed the cover.
The batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.

External Connection

Antenna connection

Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be
connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder
cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the
antenna jack. For details Please refer to the following drawing.
Antennas with 300 W
Use a 75ohm - 300ohm converter
300ohm coaxial cable

Installing Batteries

flat twins Leads
ANT IN
Antenna feeder
Antennas with 75 W
75ohm coaxial cable
-13-
1 2 3
Point the remote towards the remote
control sensor of the TV and use it
within 8 meters.
Put the used batteries into the recyc-
ling bin since they can negatively
affect the environment.
Round Leads
Antenna cable