Toyota 4A-F Repair Manual page 311

REMOVE STARTER HOUSING FROM MAGNETIC
2.
SWITCH ASSEMBLY
Remove the
two
with the idler
gaar and
3. REMOVE CLUTCH ASSEMBLY ANO tOLER GEAR
FROM STARTER HOUSING
REMOVE STEEL BAll AND SPRING
4.
Using magnetic finger. remove the spring and steel
a
the clutch
from
..
REMOVE BRUSHES AND BRUSH HOLDER
la) Remove the two screws and end cover from the field
frame.
Using
Ibl a screwdriver
springs. end remove the
holder.
bruSh holder off the armature.
Icl Pull the
6. REMOVE ARMATURE FROM FIELD FRAME
screws and remove the
clutCh assembly.
shaft hole.
or steel wire
brushes
starter housing
ball
the bruS
separate h
from
the brush