Operating Conditions - Hover-1 Fuel Operation Manual

mental capabilities to recognize, understand and perform
all of the safety instructions and to be able to assume the
hazards inherent in unit use, should not use the Fuel.
• Ensure your tire pressure is at 40 psi (280kpa) before riding.
• Ensure the battery is fully charged before riding your Fuel.

OPERATING CONDITIONS

FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY
PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO YOUR
DEVICE, VOID YOUR MANUFACTURER WARRANTY, LEAD TO
PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY, AND
CAN LEAD TO DEATH.
KICKSTAND
When your Fuel is not in use, fold the kickstand down to
allow the Fuel to lean on. To fold the kickstand up, press
kickstand release, which will unlock the kickstand and
allow you to fold it up.
NEVER RIDE YOUR Fuel WITH THE KICKSTAND DOWN.
OPERATING YOUR Fuel
Make sure the Fuel's battery pack is fully charged before
the rst initial use. Before turning on your Fuel, sit on it like a
standard bicycle to get comfortable with the device
before using it with the motor.
To be able to use the motor, the fully charged battery pack
must be mounted by sliding the battery pack forward into
the battery dock. You will here a "click" when the battery
pack is properly inserted in the battery dock.
After fully inserting the battery into place, press the power
button on the battery pack to turn on the battery. The
battery power indicator lights will light up indicating the
battery is on. Next, press and hold the power button on the
display to turn on the controller. The LCD display will light up
indicating the controller is on.
You can now begin riding your Fuel. Ensure the kickstand is
folded up before riding. As you are riding, the LCD display
default screen will show your speed and distance traveled.
23