Care And Maintenance - Hover-1 Fuel Operation Manual

Fuel pedal-assisted bicycle
Table of Contents

Advertisement

CARE & MAINTENANCE
• Do not expose the Fuel to liquid, moisture, or humidity to
avoid damage to the electrical system.
• Do not use abrasive cleaning solvents to clean the Fuel.
• Do not expose the Fuel to extremely high or low
temperatures as this will shorten the life of the electrical
system, destroy the battery, and/or distort certain plastic
parts.
• Do not dispose of the Fuel in a re as it may explode or
combust.
• Do not expose the Fuel to contact with sharp objects as
this will cause scratches and damage.
• Do not let the Fuel fall from high places, as doing so may
damage the internal circuitry.
• Do not attempt to disassemble the Fuel.
• Use only the charging cable provided by Hover-1.
• Ensure the bicycle chain is well lubricated for optimal
performance.
• To minimize tire wear and for maximum riding safety,
comfort and handling, maintain recommended tire air
pressure which can be found on the side wall of all tires.
Use a reliable tire air pressure gauge to check for proper
in ation before every ride. At the same time, inspect tires
for excessive wear and cracks. Replace tires if necessary.
Avoid using water or other liquids for cleaning. If
water or other liquids enter the bicycle, it will cause
permanent damage to the electrical system.
WARNING
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

HybridDriftH1-czr28

Table of Contents