Icons & Symbols - Philips Xenium X810 Manual

X810_En_Book.book Page 55 Monday, March 30, 2009 10:48 AM
Icons & symbols
In idle mode, several symbols can be displayed
simultaneously on the main screen.
If the network symbol is not displayed, the
network is currently not available. You may be
in a bad reception area; moving to a different
location may help.
Silent - Your phone will not ring when
receiving a call.
Vibration only - The phone will vibrate
when there is an incoming call.
SMS - You have received a new SMS
message.
MMS message - You have received a new
multimedia message.
Battery - The bars indicate the battery level
(4 bars=full, 1 bar=low).
Call divert - All your incoming voice calls
are being forwarded to a number.
Bluetooth feature is activated.
The Bluetooth headset is connected.
Icons & symbols
Alarm - The alarm clock has been
activated.
Roaming - Displayed when your phone is
registered to a network other than your
own (especially when you're abroad).
Missed call - You have a missed call.
Headset - The headset is plugged into the
phone.
Home zone - A zone designated by your
network operator. Subscription
dependent, contact your service provider
for details.
GSM Network - your phone is connected
to the GSM network.
Reception quality - the more bars are
shown the better the reception is.
Wap message - You have received a Wap
push message in the message inbox.
GPRS attach - Your phone is connected to
the GPRS network.
EDGE attach - Your phone is connected to
the EDGE network.
55